MC class strain

brand:

Points: 0

Horizontal centrifugal pumps are high pressure centrifugal pumps with bearings, a separate motor, multi-storey and radial cut-off chambers. Each floor is sealed by a Oering or paper gasket. The floors are fastened together by screwing the floors together. Pump holders are molded seamlessly with suction and thrust chambers. The radial and axial forces applied to the pump axis are counteracted by two bearings and one lubricated roller bearing with oil or grease located on either side of the impeller. In addition to ball bearings, MC pumps also use hydraulic balance pistons to neutralize axial forces.

price: 100,000 $

description

Horizontal centrifugal pumps are high pressure centrifugal pumps with bearings, a separate motor, multi-storey and radial cut-off chambers. Each floor is sealed by a Oering or paper gasket. The floors are fastened together by screwing the floors together. Pump holders are molded seamlessly with suction and thrust chambers. The radial and axial forces applied to the pump axis are counteracted by two bearings and one lubricated roller bearing with oil or grease located on either side of the impeller. In addition to ball bearings, MC pumps also use hydraulic balance pistons to neutralize axial forces.
applications:

For city water supply, industrial water pumping, water supply works, used as booster pumps, sprinkler irrigation applications, as boiler feed pumps, condensed water pumps, hot and cold water pumps for industrial installations and firefighting applications. Placed.

Specifications:

Outlet diameter: up to 2 mm
Discharge capacity: up to 2 cubic meters per hour
Height: up to 3 meters
Fluid temperature in sealing: with sealing tape from -0 to 2 degrees Celsius and mechanical sealing from -0 to -5 degrees Celsius
Test pressure: 1 times
Review

Comments

Related Products

Vertical Class PCR

price: ۱۰۰,۰۰۰ $