HOP hot oil
| price: 100,000 $ |
-
description
The pump is centrifugal with a special design and is used for pumping and circulating hot oil up to C C. The main dimensions and working specifications of the pump are in accordance with EN 733.
The pump impeller is hydraulically balanced and mounted as a hanger. The coil is of base type and the bearing housing is without base.
This pump has two deep groove ball bearings according to DIN 625 standard and is capable of pumping oils up to C C. For suction, horizontal and thrust, are vertical and flanges conform to DIN1092-2 PN10. Axial sealing This pump consists of two parts. In the sealing chamber of the pump, which is located on the hinge of the chamber, a graphite refractory strip is used for sealing the axis and a mechanical seal is installed at the end of the bearing housing.applications:
Chemical & Pharmaceutical Industries, Food Industries, Plastic Industries, Textile Industries, Leather & Paper Industries, Paint Industries, Electrical Industries, Steel Industries
Specifications:
Outlet diameter: 1 to 2 mm
Discharge Capacity: Up to 3 m3 / h
Height: up to 3 meters
Fluid temperature in sealing: up to 2 degrees Celsius
Test pressure: 1 times -
Review
-
Comments
